Austin Boat Forums | |
http://www.austinboatforums.com/cgi-bin/yabb2/YaBB.pl
Boats >> Trailers and Towing >> Trailer Brakes and Bearings http://www.austinboatforums.com/cgi-bin/yabb2/YaBB.pl?num=1362351262 Message started by 97FASTech on Mar 3rd, 2013 at 4:54pm |
Title: Trailer Brakes and Bearings Post by 97FASTech on Mar 3rd, 2013 at 4:54pm
Going to replace trailer bearings this spring, and while have them apart replace kodiak disc pads. Been a while since I worked with rotors, races and seals, but have bought a bearing install tool kit. Only thing that worries me is the getting old races out. Should I try a center punch, screwdriver or invest in a brass drift? Also have a spreader to push caliper piston back in. Also will be replacing all the brake hose with new.
Any tips will appreciated. :) |
Title: Re: Trailer Brakes and Bearings Post by nathan on Mar 3rd, 2013 at 7:57pm
screwdriver, chisel, or punch works great if you take your time. I have never used anything else so I am not for sure if anything works better. ;)
|
Austin Boat Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |