Austin Boat Forums - Print Page

Austin Boat Forums
http://www.austinboatforums.com/cgi-bin/yabb2/YaBB.pl Boats >> Mechanical >> Removing a step off a boat lift http://www.austinboatforums.com/cgi-bin/yabb2/YaBB.pl?num=1335496640 Message started by Captain YARRR on Apr 26^th, 2012 at 10:17pm

Title: Removing a step off a boat lift
Post by Captain YARRR on Apr 26^th, 2012 at 10:17pm

I didn't have time to look and remove the step on my boat lift last weekend from the previous owner's Fever. Just so I make sure I bring the right tools, any guesses on how these are usually attached? I am planning on bringing my cordless drill and my socket set. I am guessing those should do it, but are there any strange things I should know?

Title: Re: Removing a step off a boat lift
Post by mobileMERCman on Apr 26^th, 2012 at 10:21pm

Maybe a hammer. And if all else fails a hacksaw.

Title: Re: Removing a step off a boat lift
Post by nathan on Apr 26^th, 2012 at 10:50pm

thats what I was thinking take a big hammer and beer!! ;D

Title: Re: Removing a step off a boat lift
Post by Captain YARRR on Apr 26^th, 2012 at 11:54pm

Maybe a prybar just to be sure too ;)

Title: Re: Removing a step off a boat lift
Post by Jay Gadsby on Apr 27^th, 2012 at 12:23am

Sawzall... nuff said ;)

Title: Re: Removing a step off a boat lift
Post by nathan on May 1^st, 2012 at 7:02am

how did the step removal go?

Title: Re: Removing a step off a boat lift
Post by Captain YARRR on May 1^st, 2012 at 8:26am

Decided to wait a weekend. It was really windy out, I didn't have anywhere safe to tie the boat off while I worked.